Issue 2.2
Feature Description and Operation Manual
31
Error tone is provided should the user attempt to place a call on a CO line that the Station
is not permitted outgoing access. The user may receive transferred and incoming calls
on the CO line even though outgoing access is not allowed.
When selecting a CO line from a CO Group, the ipLDK employs the Round robin or Last
Choice technique to select the line as determined by PGM 160, Flexible button 3.
For a BRI, the system can change the selected bearer channel if the Station has an
appearance for each channel, or a [LOOP] button.
CO Group 25 is used to define a CO line as not equipped, unused. To prevent access
all unused CO lines must be assigned to CO Group 25.
CO line Group 00 is the Private line group. Lines in this group can only be accessed
with a button for the CO line.
If CO PGM is allowed in PGM 112, Flexible button 6, a user can program a CO line or CO
Group (Pool or Loop function) to a Flexible button.
Reference
Intercom Tenancy Group
Admin Programming
System Numbering Plan (PGM 107, Flexible button 7)
Assigns code for access to a CO Group
System Numbering Plan (PGM 107, Flexible button 8)
Assigns code for access to a specific CO line
System Numbering Plan (PGM 107, Flexible button 12)
Assigns code for first available CO line
CO PGM (PGM 112, Flexible button 6)
Permits the user to assign CO Line and Group buttons
CO Line Choice (PGM 160, Flexible button 3)
Defines the technique for CO line selection from a CO Group
CO Line Group Access (PGM 117)
Assigns CO Group access for a range of stations
CO Line Group (PGM 141, Flexible button 1)
Assigns CO Lines to a CO Group
Override 1st CO Line Group (PGM 161, Flexible button 3)
Allows search of all CO Groups for an available CO line
CO Line Attributes (PGM 141, Flexible button 10)
Assigns Tenancy groups allowed access to a range of CO lines
To Next Page
Loading...
