LG-Ericsson ipldk-60 - Page 427

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
152
3.9.3.3 LCR Digit Modification Table (PGM 222)
PGM 222 configures a digit modification process and a CO line Group for each of the 100 Digit Modification Table (DMT) entries.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 222.
3. Dial the DMT index, 00 – 99.
4. Select the desired Flexible button.
5. Enter the appropriate value.
6. Press the [Hold/Save] button.
PGM
222
Flex
Btn
Description Default Values
Added Digit
Stream (A)
1 This parameter defines the digits that are added to the user-dialed number. Digits
are added after the digit removal process (Flexible buttons 2 & 3). The digits are
added in the number at the digit position defined under Flexible button 4.
None Up to 25 digits
0 ~ 9, ‘*’, ‘#’,
CBack = Pause
DND/FWD = wait for
dial tone
Removal
Position(RP)
2 This parameter determines the position in the user-dialed number where digits are
removed. The number of digits removed is defined under Flexible button 3.
01 01-12
Number of digits
to remove (RN)
3 This parameter defines the number of digits to remove from the user-dialed number.
The digits are removed starting at the Removal Position defined under Flexible
button 2.
None 01-12
Add Position (AP) 4 This parameter defines the position in the user-dialed number where the digit
stream, Flexible button 1, is added. Digits are added after the removal process,
Flexible buttons 2 & 3.
01 01-13