LG-Ericsson ipldk-60 - Page 429

ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
154
3.9.3.4 LCR Table Initialization (PGM 223)
PGM 223 permits assignment of default values for specific LDT and DMT parameters and initializing the entire LCR database.
Procedure:
1. Press the [TRANS PGM] button.
2. Dial 223.
3. Select the desired Flexible button.
4. Enter the appropriate value.
5. Press the [Hold/Save] button.
PGM
223
Flex
Btn
Description Default Values
DMT for Day
Zone 1
1 This parameter defines the DMT index for each of three Time Zones in Day grouping
1 (see PGM 220). Entering a value changes this parameter for Day Zone 1 in the
Leading Digit Table, PGM 221.
None 3 2-digt pairs, 00 ~
99, total 6 digits
DMT for Day
Zone 2
2 This parameter defines the DMT index for each of three Time Zones in Day grouping
2 (see PGM 220). Entering a value changes this parameter for Day Zone 2 in the
Leading Digit Table, PGM 221.
None 3 2-digt pairs, 00 ~
99, total 6 digits
DMT for Day
Zone 3
3 This parameter defines the DMT index for each of three Time Zones in Day grouping
3 (see PGM 220). Entering a value changes this parameter for Day Zone 3 in the
Leading Digit Table, PGM 221.
None 3 2-digt pairs, 00 ~
99, total 6 digits
CO Line Group
Change
4 This parameter defines the default CO line for the Digit Modification Table (PGM
222). Entering a value, changes this parameter for all DMT entries.
None 01 ~ 24
ALT Index
Change
5 This parameter defines the default Alternative DMT Index for the Digit Modification
Table. Entering a value changes this parameter for all DMT entries.
None 00 ~ 99
All LCR Data 6 This Flexible button is used to initialize all the LCR data. None