Issue 2.2
Feature Description and Operation Manual
36
found, the Deny Table is searched and if a match is found in the Deny Table, the number
is restricted. Otherwise, the number is allowed.
If Incoming CO Call Toll Check is set, COS is applied if the station dials digits after
answering a call on the CO line.
When dialing on a CO line configured for behind PBX service, COS is not applied until the
user dials a PBX trunk access code.
Admin Programming
Station COS (PGM 116),
Assigns a COS to a range of Stations
CO line COS (PGM 141, Flexible button 2)
Assigns a COS to a range of CO Lines
CO Line Type (PGM 141, Flexible button 5)
Assigns the CO line for behind PBX operation
Incoming Toll Check (PGM 161, Flexible button 16)
Enables COS to be applied when users dial after answering a CO line call
CO-to-CO COS (PGM 166)
Enables a CO line to CO line connection (Unsupervised Conference)
PBX Access Code (PGM 172)
Assigns codes for PBX trunk access
Toll Exception Table (PGM 224)
Assigns Allow and Deny numbers in Toll Tables A to D
Canned Toll Tables (PGM 225)
Assigns Allow and Deny numbers to the Canned Toll Tables
To Next Page
Loading...
