ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
166
PGM
231
Flex
Btn
Description Default Values
Destination Destination Chart below
Reroute
Destination
6 This parameter defines the Flexible DID Conversion route when the original
destination is busy. Use codes ‘0 – 5’ from the Destination Table, ‘6’ + Net number
or 7 + station number for the routing to a station Voice mailbox.
Not assigned 1 ~ 5 from Destination
Table
6 + Networked station
7 + station = station VM
12 + virtual mailbox
number
Tenancy Group 7 The Day/Night Mode for the DID Destination Table is normally controlled by the
System Attendant. When desired the Day/Night mode can be controlled by a Tenant
Group Attendant.
0 (System
Attendant)
0 ~ 5
DID Destination Table
Code Destination Values
01 Station ‘01’ + station number
02 Hunt Group 02 + Hunt Group number
03 VMIB Announce ‘03’ + VMIB Announcement number
04 VMIB Announce and Drop ’04’ + VMIB Announcement number + ‘#’
05 System Speed ‘05’ + 2000 ~ 2499
06 Internal Page ‘06’ + 01 ~ 10
07 External Page ‘07’ +1
08 All Call Page ’08 + 1 = Internal All Call Page
’08 + 2 = All Call Page
09 Net Number ’09 + Net Number
10 Conference Room ‘10’ + 1 ~ 9
To Next Page
Loading...
