ipLDK-60 Issue 2.0
Admin Programming Manual July, 2010
194
PGM
500
Flex
Btn
Description Default Values
Control Protocol (TCP) or User Datagram Protocol (UDP). TCP
100Rel Support When enabled (On), the system will acknowledge provisional response (1xx)
messages from the call server.
On Off
On
Use R-port
Method
When enabled (On), the system will support the R-port SIP Method for NAT
traversal.
On Off
On
Use Single Code
Only
When enabled, the system will employ only the codec specified in PGM 340 Flexible
button 6. If unavailable at the remote end, the call is dropped.
Off Off
On
Remote Part ID When enabled (On), the system supports the Remote Party Header in SIP
messages.
Off Off
On
181 Message When enabled (On), the 181 forwarding message is supported.
On Off
On
IP Centrex When enabled, the system will support IP Centrex services from a Broadworks
platform.
Off Off
On
Dial Pad Character Chart
1 – 10
‘.’ – 13
Q – 11
Z – 12
2 – 20
A – 21
B – 22
C – 23
3 – 30
D – 31
E – 32
F – 33
4 – 40
G – 41
H – 42
I – 43
5 – 50
J – 51
K – 52
L – 53
6 – 60
M – 61
N – 62
O – 63
7 – 70 8 – 80 9 – 90
To Next Page
Loading...
