Mazda 6 2002 - Page 1176

TD8
TECHNICAL DATA
SUSPENSION
A6E931001013W01
Suspension
*1
: Fuel tank full. Engine coolant and engine oil are at specified level. Spare tire, jack, and tools are in designated
position. Adjust to the median when carrying out wheel alignment.
*2
: Difference between left and right must not exceed 1° 30′.
*3
: Distance between wheel center and fender brim is following. Front: 402 mm {15.8 in} (reference value) Rear:
392 mm {15.4 in} (reference value)
Item Specification
Front wheel
alignment
(Unloaded)
*1
Maximum steering
angle
Inner 39°±3°
Outer 31°±3°
Total toe-in
(mm {in}) Tire: 2±4 {0.08±0.16}, Rim inner: 1±3 {0.04±0.12}
(degree) 0°11′±0°22′
Caster angle
*2
(Reference value)
normal 3°47′±1°
height up
*3
3°42′±1°
Camber angle
*2
(Reference value)
normal −0°17′±1°
height up
*3
−0°10′±1°
Steering axis inclination
(Reference value)
normal 5°28′
height up
*3
5°18′
Rear wheel
alignment
(Unloaded)
*1
Total toe-in
(mm {in}) Tire: 2±4 {0.08±0.16}, Rim inner: 1±3 {0.04±0.12}
(degree) 0°11′±0°22′
Camber angle
*2
normal −1°13′±1°
height up
*3
−1°05′±1°
Thrust angle 0°±0°48′
Ball joint rotation
torque
Front upper arm
(N·m {kgf·cm,
in·lbf})
1.5 (15.0, 13.2) max.
Front lower arm (front) 1.182.23 (12.122.7, 10.519.7)
Front lower arm (rear) 1.002.22 (10.222.6, 8.8619.6)
Front and rear stabilizer control link rotation
torque
(N·m {kgf·cm,
in·lbf})
0.230.47 (2.44.7, 2.14.1)