Mazda 6 2002 - Page 712

R34
REAR SUSPENSION
Bolt (Rear Shock Absorber Lower Side) Removal Note
1. Support the trailing link with a jack.
Caution
•
••
• Removing the trailing link is dangerous.
The trailing link could fall and cause
serious injury or death. Verify that the
jack securely supports the trailing link.
End Of Sie
REAR STABILIZER REMOVAL/INSTALLATION
A6E741628100W01
1. Remove the rear auto leveling sensor.
(See T32 REAR AUTO LEVELING SENSOR REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. Adjust the headlight zeroset.
(See T31 HEADLIGHT ZEROSET.)
.
End Of Sie
A6E7416W005
A6E7416W004
1 Stabilizer control link
2 Stabilizer bracket
3 Bushing
4 Rear stabilizer