Mazda 6 2002 - Page 881

EXTERIOR LIGHTING SYSTEM
T29
T
Discharge type
Caution
•
••
• Incorrect servicing of the discharge headlights could result in electrical shock. Before servicing
the discharge headlights, always refer to the Discharge headlight service warnings. (See T25
DISCHARGE HEADLIGHT SERVICE WARNINGS)
1. Disconnect the negative battery cable.
2. Disconnect the front combination light. (See T26 FRONT COMBINATION LIGHT REMOVAL/
INSTALLATION)
3. Remove in the order indicated in the table.
Caution
•
••
• A bulb generates extremely high heat
when it is used. If the surface of the bulb
is soiled, excessive heat will build up and
the light's life will be shortened. When
replacing the bulb, hold the metal flange,
not the glass.
4. Install in the reverse order of removal.
High-beam
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
Caution
•
••
• A halogen bulb generates extremely high
heat when it is used. If the surface of the
bulb is soiled, excessive heat will build
up and the light's life will be shortened.
When replacing the bulb, hold the metal
flange, not the glass.
3. Install in the reverse order of removal.
Headlight bulb removal note
1. Release the bulb pressing wire to remove the headlight bulb.
End Of Sie
1 Cover
2 Connector
3 Bulb cover
4 Discharge headlight bulb
A6E8112W106
1 Cover
2 Connector
3 Headlight bulb (See T28 Headlight bulb removal
note)
A6E8112W107