BRAVO TWO GEAR HOUSING SERVICE MANUAL NUMBER 28
Page 3C-42 90-863160 MAY 2000
31. Install gear housing to drive shaft housing. Torque fasteners to 35 lb-ft (47 Nm).
a
b
a-Nuts And Washers (3 Each Side)
b-Bolt (1)
32. Reinstall drive unit. Refer to SECTION 2A - Removal, Installation and Adjustments.
33. Fill drive unit with Gear Lube. Refer to SECTION 1B - Maintenance.
To Next Page
Loading...
Need help?
General