dsPIC30F Family Reference Manual
DS70054C-page 7-8 © 2004 Microchip Technology Inc.
Register 7-1: OSCCON: Oscillator Control Register (Continued)
bit 1 LPOSCEN: 32 kHz LP Oscillator Enable bit
1 = LP oscillator is enabled
0 = LP oscillator is disabled
bit 0 OSWEN: Oscillator Switch Enable bit
1 = Request oscillator switch to selection specified by NOSC<1:0> bits
0 = Oscillator switch is complete
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
y = Value set from configuration bits on POR or BOR
Note: The OSCCON register description and functionality may vary depending on the clock sources
available on the selected device. Please refer to the specific device data sheet for additional
details on this register.
To Next Page
Loading...
