Oce plotwave 345 User Manual

9.
Select the [Enabled functionalities]. Enable or disable access to the selected location for print or
scan jobs.
10.
Click [Ok] to save the external location.
NOTE
The system will validate the external location and give an error message if the
validation fails.
In case of an error, you can click "Save" to save the external location with the error or
click "Change" to change the entries.
Result
The external location can be used via the user panel and in Océ Express WebTools.
Create an external location
Chapter 3 - Define your Workflow with Océ Express WebTools
107

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)