Oce plotwave 345 User Manual

The Smart Inbox in the Jobs tab
Introduction
In the Jobs tab you can create jobs or manage your jobs in the queue and the Smart Inbox.
NOTE
When the [User authentication] setting is enabled, your rights and view on the Jobs tab can
differ.
Functionalities of the Jobs tab
Create a new job in the Publisher Express section.
When you want to submit a new job, click [Create new job]. A new window opens, here you can
define some basic job settings and browse to the file you want to print.
Monitor jobs in the Queue section.
In the Job queue and Scan queue you get an overview of the jobs waiting to be printed, or scans
waiting to be sent. The options listed above the queue section allow you to move a selected job
to the top of the queue, to delete a job, to retry sending a job, or to send a scanned job to a
specific location. When you click [Delete all] all jobs are deleted from the queue.
Control your jobs in the Smart Inbox section.
You can create and open a Smart Inbox in the Smart Inbox section. For more information, see
Create and open a Smart Inbox on page 65.
You can get an overview of all the Smart Inboxes on your system. Click on [Open Smart Inbox],
click on the white space and select a Smart Inbox name from the list. The Smart Inbox appears
below.
The Smart Inbox in the Jobs tab
Chapter 3 - Define your Workflow with Océ Express WebTools
63

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)