Oce plotwave 345 User Manual

The delivery destination
Introduction
The printer is equipped with a top delivery tray to collect your printed output.
The delivery destination
In Océ Express WebTools and under [Show all settings] on the user panel you can define the
delivery destination for your printed output.
• When you select Top Delivery Tray and you use plain or transparent paper, your printed output
is by default delivered face-down in the standard Top Delivery Tray. If you use a different
media type, the printed output is always delivered at the back of the printer.
The Top Delivery Tray can collect up to 50 prints. When the sensor detects that the delivery
tray is full, the printer will stop printing. The message [The Top Delivery Tray is full. Remove
the printed output.] appears on the user panel. Remove the paper to continue printing.
• When you select [Back output] your printed output is by default delivered at the back of the
printer. Your printed output is delivered face-up.
The delivery destination
Chapter 2 - Get to Know the Printing System
29

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)