Oce plotwave 345 User Manual

Close or delete a Smart Inbox
Introduction
In Océ Express WebTools you can close or delete a Smart Inbox in:
•
The [Jobs] tab - Smart Inbox section.
•
The [Configuration] tab - [ Smart Inbox ] section.
NOTE
• When you delete a Smart Inbox, you only delete the view on the Smart Inbox, but not the
content. To permanently delete the jobs from a Smart Inbox you must select the jobs in the
Smart Inbox and click [Delete].
• The default 'Public' Smart Inbox cannot be deleted, and will always be present.
Close a Smart Inbox in the [Jobs] tab - Smart Inbox section
Step Action
1. Open the [Jobs] tab.
2. Click on the X - button at the right hand side of the [ Smart Inbox ] bar.
Delete a Smart Inbox in the [Configuration] tab - [ Smart Inbox ] section
Step Action
1. Open the [Configuration] - [ Smart Inbox ] tab.
2. Select the Smart Inbox you want to delete.
3. On the right-hand side under [Actions], click on the X.
If you want to delete all Smart Inboxes at once, click on [Delete all] in the upper right
corner.
Close or delete a Smart Inbox
68
Chapter 3 - Define your Workflow with Océ Express WebTools

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)