Oce plotwave 345 User Manual

Import a CA-signed certificate: Import the root certificate
Introduction
To ensure a fully trusted authentication via HTTPS, you can request and import a certificate
delivered by a Certification Authority (CA-signed certificate).
In Océ Express WebTools, you can generate a certificate request yourself or you can import a
predefined certificate via your computer or network. When you import the certificate you need to:
•
Import the root certificate
• Import the intermediate certificate
• Import a CA-signed certificate
• Check and import the root certificate
Complete all procedures to successfully import the certificate.
NOTE
For more details on these settings please consult the Océ PlotWave-ColorWave Systems
Security manual.
Procedure
1.
Open Océ Express WebTools
2.
Open the [Security] - [HTTPS] tab.
3.
Click on [Import CA-signed certificate]. A window opens.
4.
Select [Root certificate] in Certificate type.
5.
Browse to the Root certificate file and click on Open.
NOTE
The Root certificate may already exist in the web server certificates list.
6.
Validate to confirm the import.
7.
When the message [Certificate successfully imported.] pops up, go on to import the [Intermediate
certificate].
8.
Click [Ok] to save.
Import a CA-signed certificate: Import the root certificate
84
Chapter 3 - Define your Workflow with Océ Express WebTools

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)