Oce plotwave 345 User Manual

Advanced settings for print jobs
Introduction
When you tap the [Print] tile on the multi-touch user panel, you can make your own settings.
Apart from the preset tiles, you can select the advanced settings under [Show all settings]. The
following table gives an overview and a short description of the available settings on the printer.
You can find a detailed description of each setting in Océ Express WebTools.
Preset category: [Media]
Setting Settings values Function
[Media type] Any type
List of media types
The type of media you use.
[Media size] Any size
List of media sizes
The size of media you use.
[Media source] [Automatic]
'Roll 1' (description of me-
dia type and media size
loaded on roll 1)
'Roll 2' (description of me-
dia type and media size
loaded on roll 2)
[Manual]
Define the media feed to copy or print on.
When you select [Auto] the printer automati-
cally selects the media roll.
Advanced settings for print jobs
162
Chapter 4 - Use the Printing System

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)