Oce plotwave 345 User Manual

View and check the settings
Introduction
In Océ Express WebTools you can view and check your settings. You can also check which
settings are no longer set to the factory default value.
Procedure
1.
Open the [Configuration] tab or the [Preferences] tab.
2.
Click on [View configuration] in the upper right-hand corner of the screen. A window opens.
3.
Scroll through the list of settings. The first column displays the setting and the second column
displays the values. A "*" indicates that the value of the setting is different than the original
factory default value.
NOTE
You can print the information with the standard print function of your browser.
View and check the settings
Chapter 3 - Define your Workflow with Océ Express WebTools
53

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)