Oce plotwave 345 User Manual

Print a test print
When to do
Print a test print from a specific roll at the request of the helpdesk. The test print provides
information that can help to solve quality problems.
Procedure
1.
Tap the system menu thumbnail on the user panel. A window opens.
2.
In the list on the right, select [Test prints]. A wizard opens.
3.
Select the roll you want to print from.
4.
Tap OK.
Print a test print
Chapter 8 - Solve Problems
277

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)