Oce plotwave 345 User Manual

Getting Started
Océ Express WebTools
Introduction
Océ Express WebTools is an application that runs embedded on your printer. Use an up-to-date
Internet browser (Google Chrome, Microsoft Internet Explorer or Mozilla Firefox) to open the
homepage of Océ Express WebTools on your computer or mobile device.
Definition
You can use Océ Express WebTools to:
• Manage print, copy and scan jobs.
• Send print jobs to the printer with Océ Publisher Express.
• Access the settings to manage the configuration and preferences of the printing system.
When you want to change settings in Océ Express WebTools, you must log in with one of three
predefined user roles. For more information, see User roles and authorizations on page 44.
• Monitor the status of the printing system.
How to access Océ Express WebTools
To access Océ Express WebTools:
• Enter the product name of the printer as a Hostname, for example http://PlotWave3XX, in the
workstation web browser.
or
• Enter the printer's IP address, for example http://123.123.23.123, in the workstation web
browser.
NOTE
When Océ Express WebTools does not appear, contact the network administrator to check the
network parameters. Check whether the printer's network settings have been registered in the
network infrastructure.
Getting Started
42
Chapter 3 - Define your Workflow with Océ Express WebTools

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)