Oce plotwave 345 User Manual

Make a half size copy
Introduction
When you want to scale your original to a 50% copy, you can change a preset on the user panel.
Procedure
1.
Feed the original face up and centered on the original feeding table.
2.
Tap the copy tile. A window with a list of presets opens.
3.
Tap the [Layout] preset.
4.
Tap [Half size].
5.
Define the number of copies and tap the green button.
Result
The printer copies to 50%.
Make a half size copy
178
Chapter 4 - Use the Printing System

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)