Oce plotwave 345 User Manual

Enable or disable the e-shredding function
Introduction
The e-shredding function allows you to securely erase jobs from the system. This prevents
unauthorized people from recovering deleted jobs. When the e-shredding function is enabled,
you can select an e-shredding algorithm. You can enable the e-shredding function in Océ Express
WebTools. By factory default, the e-shredding function is disabled.
NOTE
For more details on these settings please consult the Océ PlotWave-ColorWave Systems
Security manual.
Procedure
1.
Open the [Security] - [Configuration] tab.
2.
In the [E-shredding] section, click on the [E-shredding] field.
3.
Select [Enabled] or [Disabled]. The setting is enabled when you check the box.
NOTE
When e-shredding is enabled, the system may require more time to process jobs.
4.
Click OK to confirm.
Enable or disable the e-shredding function
78
Chapter 3 - Define your Workflow with Océ Express WebTools

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)