Oce plotwave 345 User Manual

Clear the system
When to do
On the user panel, you can remove all print and copy jobs from the system.
Procedure
1.
Tap the system thumbnail in the dynamic bar. A new window opens.
2.
In the list in the bottom right corner of the screen, select [Clear system].
A wizard opens.
NOTE
Make sure you have saved all the information. All print and copy jobs are removed.
3.
Follow the steps in the wizard and complete the procedure.
Result
After you have followed the steps, the system will reboot and all print and copy jobs are
removed.
Clear the system
Chapter 4 - Use the Printing System
207

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)