Oce plotwave 345 User Manual

Replace the Media
Remove a media roll
IMPORTANT
• Handle the media roll with care. A dented media roll can damage the printer.
• Do not open the media drawer during the printing process.
CAUTION
• Watch your fingers when you handle the media roll.
• If you want to remove an A0 media roll from position 2, make sure to bend your knees, as
indicated below, to spare your back.
Illustration
Replace the Media
224
Chapter 5 - Maintain the Printing System

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)