Oce plotwave 345 User Manual

Import a CA-signed certificate
To ensure a fully trusted authentication via HTTPS, you can request and import a certificate
delivered by a Certification Authority (CA-signed certificate).
When you import the certificate you need to:
• Import the root certificate
• Import the intermediate certificate
•
Import the CA-signed certificate
• Check and import the root certificate
Complete all procedures to successfully import the certificate.
Procedure
1.
Open the [Security] - [HTTPS] tab.
2.
Click on [Import CA-signed certificate].
3.
Select [CA-signed certificate] in Certificate type.
4.
Select 'Yes' to validate the certificate against Java root certificates and click 'Open'.
5.
When the message [Certificate successfully imported.] pops up, restart the controller.
The certificate is now installed on the server.
Check and import (if needed) the CA Root certificate into the workstation web browser as well.
That will secure the complete data workflow between the workstations and the server.
Import a CA-signed certificate
86
Chapter 3 - Define your Workflow with Océ Express WebTools

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)