Oce plotwave 345 User Manual

The original type
Introduction
When you change the [Original type] setting under [Show all settings] - [Original] on the user
panel, you can further optimize the quality of your job.
Use the overview to select the correct type.
Original types
Original type Definition
[Lines/text] Used for monochrome CAD drawings.
[Colored original] Used for most colored originals, such as colored CAD drawings.
[Photo] Used for photos and high resolution prints. Photo gives a softer con-
trast than colored original.
[Dark original] Used especially for Diazo originals. Originals with a changing 'cloudy'
background.
[Folded lines/text] Used for monochrome CAD drawings with folds. Lines and wrinkles are
suppressed. For folded color CAD drawings use [Colored original].
[Blueprint] Used for classic blueprints, with white information on a blue back-
ground.
The original type
Chapter 4 - Use the Printing System
177

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)