Oce plotwave 345 User Manual

Print presets on the user panel
Introduction
The printer uses the default presets for print and copy jobs, when you do not make different
settings. The print presets are divided into four categories:
• [Media]
• [Layout]
• [Image]
• [Finishing]
You can change the presets for all of these categories in Océ Express WebTools. For more
information on:
The preset concept
What you need to know about presets on page 88
How to change the preset
settings
Set the default print preset on page 91
Print presets on the user panel
Chapter 4 - Use the Printing System
161

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)