To Next Page

To Previous Page

Use the Océ PostScript

3 Driver to send a print job

Introduction

Océ provides the Océ PostScript

3 Driver that allows you to send print jobs to your printer.

NOTE

You need a license to be able to print PostScript files on the printer.

Illustration

Procedure

Step Action Remarks

1 Open the file that you want to print

in the source application.

2 From the [File] menu of the applica-

tion, click [Print].

3 Select the product name of your

printer in the [Printer] area of the

[Print] dialog box.

4 Click [Properties] and [Advanced]. When you select Properties you can make set-

tings for the print job.

5 Activate the Océ Job Ticket to over-

rule the default values for the job set-

tings.

6 Check and change the Printer Fea-

tures settings if necessary.

7 Click [OK] to send the print job to the

Smart Inbox or the print queue.

Use the Océ PostScript® 3 Driver to send a print job

148

Chapter 4 - Use the Printing System

Questions and Answers:

Need help?

Do you have a question about the Oce plotwave 345 and is the answer not in the manual?

Oce plotwave 345 Specifications

General