Oce plotwave 345 User Manual

Create and open a Smart Inbox
Introduction
A Smart Inbox is used as a personal folder to print files from, scan files to, or store files in. In Océ
Express WebTools you can create a Smart Inbox in:
•
The [Jobs] tab - Smart Inbox section.
•
The [Jobs] tab - Publisher Express section.
•
The [Configuration] tab - [ Smart Inbox ] section.
NOTE
• Note that the behavior of the Smart Inbox can differ, depending on which of the three ways is
used for the creation.
• When user authentication is enabled your Smart Inbox rights can differ.
Create a Smart Inbox in the [Jobs] tab - Smart Inbox section
NOTE
• The Smart Inboxes created in the Smart Inbox section are only visible on your personal
browser. When you send a print job to the specific Smart Inbox, that Smart Inbox also
becomes visible on the user panel.
• The Smart Inboxes created in the Smart Inbox section are not permanent. Once the Smart
Inbox is empty, it will disappear.
Step Action
1. Select the [Jobs] tab.
2. Click on [Open Smart Inbox].
3. Click on the blank field to open a drop-down list with the Smart Inboxes available on
your system.
4. Enter the name of the new Smart Inbox and press Enter, or select the desired Smart
Inbox from the list.
5. The Smart Inbox is now displayed in the Smart Inbox section.
Create and open a Smart Inbox
Chapter 3 - Define your Workflow with Océ Express WebTools
65

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)