Oce plotwave 345 User Manual

Get a new license file
Introduction
The Océ applications and optional functions are protected against unauthorized use. You need to
activate licenses to enable various options. When you want to get a new license you have to
provide the correct information to your local representative.
Procedure
1.
Open the [Support] - [Licenses] tab to display the license information page.
2.
View which licenses you have and do not have. Note the [Option] information and the license
number down of the licenses you would like to have.
3.
Click on [Host id], and note the host id information down.
4.
Send the license information and the host id to your local representative.
5.
After receiving the license file from the representative, store the file on the network.
Result
After you stored the new license file, you can activate the license. For more information, see
Activate a new license on page 256 .
Get a new license file
Chapter 6 - License Management
255

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)