Oce plotwave 345 User Manual

Clear a media jam in the heater section
Introduction
When a media jam in the heater section occurs, you have to handle with care.
IMPORTANT
During normal use, the fuser has to remain closed. Only open it to remove the media after a
media jam.
Procedure
1.
Wait a few moments to let the heater cool down.
2.
Use the media jam clearance handle to open the upper back cover.
Clear a media jam in the heater section
268
Chapter 8 - Solve Problems

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)