Oce plotwave 345 User Manual

• The system administrator configures the network and Wi-Fi infrastructure
• The System Administrator enters the configuration information on the printer controller
interface.
With this information you can generate and print the QR card.
The QR card contains the QR code, and it contains information on how to connect to the Océ
Mobile WebTools.
• The user activates Wi-Fi on the mobile device, and connects to the network. The user opens
Océ Mobile WebTools on the device's web browser.
• With Océ Mobile WebTools the user can print a file from the mobile device, and the user is
able to save a scanned document.
Get the latest information on infrastructure and mobile device compatibility
Refer to the Océ PlotWave-ColorWave Systems Connectivity manual on the
http://
downloads.oce.com product page to get information on the connection requirements, or visit
http://www.canon.com/support/ to find more information on mobile connection.
Océ Mobile WebTools
132
Chapter 3 - Define your Workflow with Océ Express WebTools

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)