Oce plotwave 345 User Manual

Preset category:[Layout]
Preset Settings values Function
[Cut size] [Cut method]:
• [Synchro]
• [Standard]
• [Custom]
When set to [Synchro], the print is cut depen-
ded of the image.
When set to [Standard], the print is cut to a
standard media size.
When set to [Custom], you must enter the
sizes manually.
[Add a leading strip] Adds a blank strip at the beginning of the out-
put.
From 0 to 400 mm or 0 to 16".
[Add a trailing strip] Adds a blank strip at the end of the output.
From 0 to 400 mm or 0 to 16".
4
Advanced settings for copy jobs
170
Chapter 4 - Use the Printing System

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)