Oce plotwave 345 User Manual

3.
Remove any jammed media.
NOTE
When the material cannot be removed easily, open the upper back cover with the
media jam clearance handle to access to the jammed material. For more information,
see Clear a media jam in the heater section on page 268).
4.
Pull up the media bypass.
5.
Close the lower front cover.
Clear a media jam in the media bypass section
Chapter 8 - Solve Problems
271

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)