Oce plotwave 345 User Manual

The scanner states
State Icon Description
[User intervention re-
quired]
General error message.
[Scanner is busy] The scanner is active.
[Scanner is ready] The scanner is ready to start a scan job.
The toner states
Icon Description
Toner OK
Toner low, or empty.
The Remote Service States
Icon Description
no icon [ Remote Service ] is either disabled or enabled and connected to Océ.
[ Remote Service ] is enabled, but could not connect to Océ.
Remote assistance to the system is enabled and currently accepting a connection.
The E-shredding states
Icon Description
no icon E-shredding is disabled.
E-shredding is enabled or busy.
A tooltip is available with extra information.
The system monitor
Chapter 3 - Define your Workflow with Océ Express WebTools
49

Oce plotwave 345 Specifications

General

Resolution	600 x 1200 dpi
Memory	4 GB
Hard Drive	500 GB
Print Technology	Electrophotography LED
Print Speed	6 A1/D prints per minute
Media Handling	Rolls
Maximum Media Width	36 inches
Technology	Océ Radiant Fusing
Media Width	Up to 36 inches
Roll Capacity	Up to 2 rolls
Media Length	Up to 18.3 m (60 ft)