Omron ZW-7000 Series - Page 155

Setting the Output Conditions
ZW-7000/5000
User's Manual
153
4
Settings for Function
Setting the Offset
Set this item to set the reference value by a zero reset to a value other than zero.
 Multi View Explore : [Bank] | [(Bank Data Name)] (double click)
→ Edit pane : [Task Settings] icon ( )
→ Task Settings window : [Zero reset]
Item Setting item Setting value Description
Zero reset Offset -999.999999 to 999.999999 [mm]
(default value: 0)
Set the offset value.
1 Set [Status] to ON.
Setting the Status p.152
Offset can be set only when [Status] is set to ON.
2 Enter an offset value at [Zero reset] - [Offset].
The offset can also be set by the operating keys on the Sensor Controller.
Setting the Offset p.231
Important
Note