Setting the Output Conditions
154
ZW-7000/5000
User's Manual
Setting the Zero Reset Type
Set the zero reset type.
Multi View Explore : [Bank] | [(Bank Data Name)] (double click)
→ Edit pane : [Task Settings] icon ( )
→ Task Settings window : [Zero reset]
Item Setting item Setting value Description
Zero reset Ty pe Real value Sets the measured value when a zero reset is executed to zero.
Hold value Sets the measured value (hold value) when a zero reset is executed to zero.
This is enab
led when hold measurement is performed.
1
Set [Status] to ON.
Setting the Status p.152
The zero reset type can be set only when [Status]
is set to ON.
2
Select the zero reset type from [Type].
The zero reset type can also be set by the operating keys on the Sensor Controller.
Setting the Zero Reset Mode p.232
Measurement of height
from reference surface
Zero reset
Reference A
Sensor head
Measurement of height
from reference surface
Zero reset
Hold A
(reference)
Direction of movement
Sensor head
Important
To Next Page
Loading...
