Omron ZW-7000 Series User Manual

Setting the Output Conditions
ZW-7000/5000
User's Manual
233
Sensor controller operations
7
Setting the Zero Reset Memory
Setting the Zero Reset Memory p.155
As an example, here is an explanation of the procedure for selecting the “ON” (enabled) zero reset memory
setti
ng.
Operating procedure
Steps Key operation Display Description
1 Press and hold the key for two seconds to enter the FUNC
mode.
2 Press the / keys to select “SYSTEM” and press the
key.
3 Press the / keys to select “ZER.MEM” and press the
key.
4 Select zero reset memory ON/OFF.
The current setting value is displayed on the sub-display.
Press / key to enter editing mode and the sub-display blinks.
In this example, select “ON” and press the
key.
5 Press the key for two seconds to enter the RUN mode.

Omron ZW-7000 Series Specifications

General

Brand	Omron
Model	ZW-7000 Series
Category	Accessories
Language	English