Tighten the side screws fixing the tank to the
frame.
Locking torques (N*m)
Tank side screws - Frame 5.5 ÷ 7
Loosely tighten the fixing screw of the voltage reg-
ulator bracket to the frame.
Connect the relative electrical connection to the
horn.
Fit the front crosspiece making sure that the lower
pin of the tank fits perfectly in the central slot pro-
vided on the said crosspiece.
Tighten the fixing screws of the front crosspiece to
the frame.
Chassis Beverly 300 i.e.
CHAS - 272
To Next Page
Loading...
