Tighten the lock nuts of the bracket of the regulator
to the front crosspiece.
After tightening the fixing screw of the bracket of
the voltage regulator, tighten the lower screws of
the front wheel housing.
Tighten the fixing screws of the rear crosspiece.
Locking torques (N*m)
Rear crosspiece screws - Frame 16 - 25
Tighten the screws of the footrest support.
Locking torques (N*m)
Footrest support screws 8 ÷ 10.5
Beverly 300 i.e. Chassis
CHAS - 273
To Next Page
Loading...
