VessRAID 1000i Series Product Manual
88
5. Under the Type dropdown list, choose User Database.
6. Enter the name of the file to be imported.
Or, click the Browse... button to search for the file.
Look for a file called export.
7. Click the Submit button.
8. Click the Next button.
If the imported file is a valid user database, a warning will appear to inform
you that it will overwrite the previous settings.
9. In the Warning box, click the OK button.
This user settings are applied to this VessRAID subsystem.
Importing a Configuration Script
The Software Management–Import tab enables you to import a Configuration
Script to the VessRAID subsystem. You can write a CLI configuration script to
automatically configure your VessRAID subsystem. The script must be a plain,
non-encrypted text file. The Import function runs the script and performs the
configuration automatically.
To import a Configuration Script to this subsystem:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Software Management icon.
4. Click the Import tab.
5. Under the Type dropdown list, choose Configuration Script.
6. Enter the name of the file to be imported.
Or, click the Browse... button to search for the file.
7. Click the Submit button.
8. Click the Next button.
If the imported file is a valid configuration script, a warning will appear to
inform you that it will overwrite the previous settings.
9. In the Warning box, click the OK button.
Note
The Decryption box is grayed out. Decryption is enabled for user
databases.
To Next Page
Loading...
Need help?
General
