Chapter 5: Management with the CLU
171
Deleting a Spare Drive
To delete a spare drive:
1. From the Main Menu, highlight Spare Drive Management and press Enter.
A list of the current spare drives appears.
2. Highlight the spare drive you want to delete and press the spacebar to mark
it.
The mark is an asterisk (*) to the left of the listing.
3. Highlight Delete Marked Spare Drives and press Enter.
4. Press Y to confirm the deletion.
Caution
If the spare drive you delete is the only spare, the controller will not
rebuild a critical array until you provide a new spare drive.
To Next Page
Loading...