VessRAID 1000i Series Product Manual
26
LCD Panel
The LCD panel activates approximately 35 seconds after you switch on the
VessRAID’s power supply.
At first, the LCD screen displays
System is Initializing
.
When the VessRAID is fully booted and running under normal conditions, the
LCD screen shows the VessRAID model number and IP address, as shown in
Figure 19.
Figure 19.VessRAID optional LCD display
A list of LCD panel functions and instructions for using them is included in the
VessRAID Product Manual on the CD.
This completes the power and start-up.
For setup instructions, see “Chapter 3: VessRAID Setup” on page 27.
To Next Page
Loading...