Promise Technology VessRAID 1720i User Manual

Chapter 5: Management with the CLU
141
Making a Telnet Connection
A Telnet connection requires a network connection between the Host PC and
VessRAID controller’s Management (Ethernet) port.
Figure 2. Management port on the controller
To start the telnet program:
1. Go to the command line prompt (Windows) or click the terminal icon (Linux).
2. Type telnet 192.168.1.56 2300 and press Enter.
The IP address above is only an example.
Use your VessRAID's Management port IP address.
2300 is the Telnet port for the VessRAID.
3. Press Enter once to launch the CLI.
Logging In
1. At the Login prompt, type the user name and press Enter.
The default user name is administrator.
2. At the Password prompt, type the password and press Enter.
The default password is password.
The CLI screen appears.
3. At the administrator@cli> prompt, type menu and press Enter.
The CLU Main Menu appears.
Management port

Promise Technology VessRAID 1720i Specifications

General

Brand	Promise Technology
Model	VessRAID 1720i
Category	Enclosure
Language	English