VessRAID 1000i Series Product Manual
42
Using WebPAM PROe over the Internet
The above instructions cover connections between VessRAID and your company
network. It is also possible to connect to a VessRAID from the Internet.
Your MIS Administrator can tell you how to access your network from outside the
firewall. Once you are logged onto the network, you can access the VessRAID
using its IP address.
While only a iSCSI or SAS-capable PC can read and write data to the logical
drives on the VessRAID, other PCs can monitor the VessRAID from virtually any
location.
To Next Page
Loading...