Chapter 4: Management with WebPAM PROe
89
The new configuration is applied to this VessRAID subsystem.
Updating the Firmware
See “Chapter 7: Maintenance” on page 231 for instructions.
Viewing Flash Image Information
Flash image information refers to the package of firmware components running
on your VessRAID controller or controllers, including:
• Component name
• Version number
•Build date
• Flash (installation) date
• Controller number (1 or 2)
To view flash image information:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Software Management icon.
4. Click the Image Version tab.
The flash image information displays on the screen.
Running Image Info – The firmware package currently running on the
controllers
Flashed Image Info – The firmware package flashed to memory
If the Running and Flashed Images do not match, the VessRAID has not
restarted since the firmware was last updated. Restart the VessRAID to run the
Flashed firmware package. See “Restarting the Subsystem” on page 94.
Note that all of these components are upgraded together in a package. See
“Updating the Firmware in WebPAM PROe” on page 231.
Note
The Decryption box is grayed out. Decryption is disabled for
configuration scripts.
To Next Page
Loading...
Need help?
General
