VessRAID 1000i Series Product Manual
150
Managing the Enclosure
Enclosure Management includes the following functions:
• Viewing Enclosure Information (page 150)
• Viewing Power Supply Status (page 150)
• Locating a Power Supply (page 151)
• Viewing Cooling Unit Status (page 151)
• Viewing Voltage Sensor Status (page 151)
• Viewing Temperature Sensor Status (page 151)
• Setting Temperature Thresholds (page 152)
• Checking the Batteries (page 152)
• Reconditioning a Battery (page 153)
• Locating an Enclosure (page 153)
• Viewing Enclosure Topology (page 154)
Viewing Enclosure Information
Enclosure Management includes information, status, settings and location. To
access Enclosure Management:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
To access FPU VPD information (vital product data on field replaceable units),
highlight FPU VPD Information and press Enter.
This function lists the battery backup unit and backplane.
Viewing Power Supply Status
To view the status of the power supplies:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
3. Highlight Power Supply Units and press Enter.
The screen displays the status of VessRAID’s power supply. If any status
differs from Powered On and Functional, there is a power supply
malfunction. See “Replacing a Power Supply” on page 236.
To Next Page
Loading...
Need help?
General
