Chapter 4: Management with WebPAM PROe
51
Working with the Storage Network
When you log into WebPAM PROe, you access a specific VessRAID subsystem.
See “Logging into WebPAM PROe” on page 44.
The Storage Network feature enables you to access all of the VessRAID
subsytems with a Management Port connection to your network.
Each VessRAID subsystem is identified by its Management Port IP address.
Storage Network functions include:
• Viewing other subsystems
• Updating the list of subsystems
• Logging into a subsystem
• Hiding the other subsystems
Viewing Other Subsytems
To view the other VessRAID subsytems the Storage Network:
1. Click Storage Network in the Header.
2. Click the Show Network Subsystems popup option.
The list will show all subsystems the network at the time the GUI was
launched.
Updating the List of Subsystems
To update the list of the VessRAID subsytems the Storage Network:
Click the Discover button at the bottom of the subsystem list.
Logging into a Subsystem
To log into any of the displayed VessRAID subsystems:
1. In Tree View, click the Subsystem icon of the subsystem you want to see.
If your user name and password do not match the subsystem you are
logging into, the log in screen will appear.
2. Log into the new subsystem, as needed.
Hiding the Other Subsystems
To hide the other VessRAID subsystems the Storage Network:
1. Click Storage Network in the Header.
2. Click the Hide Network Subsystems popup option.
To Next Page
Loading...
Need help?
General
