Managing Enclosures
217
Managing Enclosures
The LCD panel provides information on the main VessRAID subsystem or Head
Unit only. For a JBOD as well as other Enclosure functions, see “Managing
Enclosures” on page 99 (WebPAM PROe) or page 150 (CLU).
Viewing the Enclosure
This function requires the LCD to be in Advanced mode. See page 212.
To view enclosure information:
1. Press the or button until the display says View Enclosure.
2. Press the button and the display says Enclosure Status.
3. Press the button again and the display says Temperature Status.
This is the item list. It includes:
• Temperature status
• Fan status
• Power Supply status
• Voltage status
4. Press the or button to scroll through the list of items:
5. Press the button to display the reported value for the item. Then press
the button to return to the item list.
Making Buzzer Settings
The buzzer sounds to inform you that the VessRAID needs attention. See
“VessRAID is Beeping” on page 277 for more information.
To make buzzer settings:
1. Press the or button until the display says Misc. Management.
2. Press the button and the display says Buzzer Configure.
3. Press the button again and the display shows the current Buzzer
setting.
4. Press the or button to toggle between Enable and Disable.
5. Press the button make the new buzzer setting.
6. Press the button again to confirm.
To Next Page
Loading...
Need help?
General
