Chapter 4: Management with WebPAM PROe
49
Click the Help button in Management View to access online help for the function
that is currently displayed.
Viewing the Event Frame
To view the Event Frame:
1. Click View in the Header.
2. Click the Show Event Frame popup option.
The VessRAID user interface will display the Event Frame below
Management View.
3. Click View again to hide the Event Frame.
In the event frame, events are listed and sorted by:
• Item Number – A consecutive decimal number assigned to a specific event
• Device – Battery, controller, logical drive, physical drive, port, etc.
• Event ID – The hexadecimal number that identifies the specific type of event
• Severity – Information, Warning, Minor, Major, Critical, and Fatal. The
severity level is user-specified. See “Setting-up User Event Subscriptions”
on page 63.
• Time – Time and date of the occurrence
• Description – A brief description of the event
Sorting Events
You can sort the events by Item Number, Device, Event ID, Severity, Time and
Date, or Description.
Click the link at the top of the column by which you want to sort the events. After
you click the item, a triangle icon appears.
• If the triangle points upward, the column is sorted low-to-high or old-to-new.
• If the triangle points downward, the column is sorted high-to-low or new-to-
old.
Click the link a second time to change to flip the triangle and reverse the sort
sequence.
Logging out of WebPAM PROe
There are two ways to log out of WebPAM PROe:
• Close your browser window
• Click Logout on the WebPAM PROe banner
To Next Page
Loading...
Need help?
General
